MacOS FTTI Installation

Here's the installation guide. On page 3, use this link to get the dmg and select the appropriate file for your MacOS version.  10.9 seems to work with the release for 10.8.  You want the one that creates the virtual com port.



Here's the error I was getting:

avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: Send: 0 [30]   [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding 

blogodex = {"idx" : ["FTDI", "MacOS FTDI Drivers"]};