Taranis Binding

Binding with the built-in module is pretty simple.
tl;dr: there's not a bind button, it' on the model menu.

• If the Rx is in an aircraft, disable the prop!
• Start with Tx, Rx off.
• Press the bind button on the Rx.
• Keeping the bind button depressed, power on the Rx.
• The RX will show a solid red light.
• Turn on the Tx.  There's no bind button to press.
• Go to model menu #1.
• Select the bind menu option.
• The Rx will blink to confirm the bind.
• The Tx will beep to confirm the bind.
• Unplug and replug the Rx.
• Everything should be bound!