My conclusion was that there is only one hand crimper made that works for the 1.25mm and 1.5mm connectors. It can also do the 1mm JST-SH but it's a a bit more of a struggle. They specify it as 1.25-2.5mm but show JST-SH as a typical terminal it can be used for.
On anything above 1.25mm it works a treat. It's not cheap (as in Chinese HobbyKing cheap) but don't let the stamped steel look fool you.
This is a precision Japanese made crimper with a adjustable hinge pin for alignment. It is called the Engineer PA-09.
blogodex = {"idx" : ["crimpers", "connectors"]};
No comments:
Post a Comment