Sunday, March 30, 2014

Notes: Welcome to Taranis, Part 2: Binding an X Series Receiver

These are notes to accompany the Welcome To Taranis series.  Follow the link to see the videos and other notes.

Part 2: Binding an X Series Receiver
  • note polarity on receiver.
  • remove or disable props.
  • on Rx, power on while pressing failsafe/bind button
  • on Tx, go to model setup screen
  • select mode D16, channel range CH1-8
  • select bind
  • disconnect and reconnect power on Rx
  • Tx/Rx bound, controls should be operational

blogodex = {"toc":"Welcome to Taranis","index":"Taranis"};

No comments:

Post a Comment