Battery Charger protection circuit

- Designed for 18650 batteries
- Up to 1,000 mA charging current
- Based on TP4056 Chipset
- Battery protection circuit
- Charging status LED's

- Input voltage : 4.35 - 6 V, 5 V recommended
- Charge cut-off voltage: 4.2 V + / - 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
- Battery overcharge lifting voltage: 4.00 V
- Battery discharge protection voltage: 3.0 V
- Battery discharge termination voltage: 3.2 V
- Battery: over-current protection current 3 a
- Board size: about 2.5 * 1.65 CM
- Status LED
- Standby : Dimly lit, Charging : Red and Charge Complete : Green