DIY FrSky Rx

RCGroups user midelic has a DIY FrSky D8 compatible receiver, porting PhracturedBlue's Deviation work.

Canonical information page here.
Banggood is selling them here:

Airwolf F801
Airwolf F802

HobbyKing -- same?

AC410

Bonus:
DIY SBUS 16ch decoder






Some Reviews:

• drone-maniac
• vertile
• intofpv
• hacksmods
• 
  

blogodex = {"toc" : "DIY Frsky", "idx" : ["midelic"]};

HobbyKing Wingnetic

EastBay RC went officially crazy at the HobbyKing Black Friday sale.  First up, the Wingnetic!

Notes:

• Build was simple, just glue on the fins.  Double check that the wings are glued on, some people report that they're not completely glued an were loose in flight.
• CG is 240mm-250mm from the front of the spinner.  The manual says 205mm, which is incorrect.
• a few clicks of up elevator (about 1mm) helps on launch.
• Some people report 60% travel with 50% expo for low rates works well.
• removable fins mod.
• Demo7 shows how to laminate the wings.

• HobbyKing Page

blogodex = {"toc" : "Wingnetic" };