Some rcexplorer kkboard dimensions

Mike Grundvig, maker of the AeroFPV aluminum frame, is very kindly going to send us an aluminum mount for the kkboard, and offer that mount in the AeroFPV kit.  He requested we send some dimensions and pics.

David over at rcexplorer sent us these dimensions:

• hole distances: 45mm
• distance between two holes diagonally: 63.6mm
• board: 50*50mm. 
• exact same size and hole distance as a MikroKopter controller.

Here's our board.

 The mounting holes seem to be about 3mm.

 I just cut a 4 x 3 x 1/8 inch piece of basswood (about the same size as the ardu board) and mounted that to the aerofpv frame.  I was going to be fancy and bolt the kkboard onto the basswood, but I didn't have any non-slip bolts of that size, so instead I'll just use 3M thick double-sticky tape.  That should give a bit of bonus vibration protection as well.






Here's the back of the board.