FrSky X Series Failsafe Modes

The X8R and most FrSky receivers offer 3 options for failsafe.

1. They default to hold last good command.
2. You can program a set failsafe position via the Taranis, or pushing the f/s button on the receiver while holding the channels where you would like them.
3. Push the F/S button on the receiver when the transmitter is turned off, and the receiver will not output anything when in failsafe. This is handy for many flight controllers to trigger a safety mode.

Courtesy of rotozuk.  I didn't know about the third one.

blogodex = {"idx" = ["FrSky", "Failsafe"]};