cjz89civic@RCGroups shares his setup here. It's based on the Flite Test article.
- 200mw transmitter $14 I got the 5v one it works fine at 3 volts and less.
- Camera $20 This camera is as good as the one that Flite Test uses and there recommended camera is $50 alone.
- Antenna $9 for 2 (added this I got better video quality and about 100 meters more distance snipped off connector and soldered right to the board as the stock whip was)
- Dip Switch is a add on its $3 at Radio shack or cheaper on ebay You can simply solder ground to the channel inputs for desired channel to save 1.2 grams.
blogodex = {"idx" : ["UMX Radian", "FPV", "things to try"};
No comments:
Post a Comment