Notes: Welcome to Taranis, Part 3: Binding a D Series Receiver

These are notes to accompany the Welcome To Taranis series.  Follow the link to see the videos and other notes.

Part 3: Binding a D Series Receiver

• Note polarity on receiver.
• remove or disable props.
• on Rx, power on while pressing failsafe/bind button
• on Tx, go to model setup screen
• select mode D8, channel range CH1-8
• select bind, hear beep
• disconnect and reconnect power on Rx
• Tx/Rx bound, controls should be operational

blogodex = {"toc":"Welcome to Taranis","index":"Taranis"};