This uses the Turnigy 9x backlight from Hobby King:
colors available: blue green white
It's a bit more complicated than modifying the 9x, because you can't use the supplied wire harness. Instead you clip the wire harness off, and solder the leads to the board. Reports indicate it's about a 30 minute job. I'll allocate an evening to it.
I've got this on my todo list... in the meantime, here's a link to the original article.
Follow to at least page 3, where there's revised instructions.
http://www.hobbyking.com/hobbyking/forum/forum_posts.asp?TID=18137
No comments:
Post a Comment