- For good 3D you should have at least +- 45 degrees.
- Cut slits only if you have stiff hinges. If they are already flexible the slits won't help.
- The longer arms are pretty typical, especially for the 5 gram servos.
- Possibly increase the servo travel if your Tx allows. Most computer radios allow you to do this in the "travel adjustment" and also in the "dual rate/expo" set up.
- For me, more throw means I use more expo for nice control response.
- For the HXT 500, Dubro 930 Micro Servo Arm XL
- For the HXT 900, Dubro 932 Micro Servo Arm XL
Showing posts with label leadfeather. Show all posts
Showing posts with label leadfeather. Show all posts
Monday, January 2, 2012
Servo Extension Arms for 3D Foamies
Great advice from Leadfeather:
Subscribe to:
Posts (Atom)