EastBay RC

Config Instructions: https://drop.com/talk/9382/how-to-configure-your-ctrl-keyboard (DONT FORGET TO DOWNLOAD applet-flash-samd51j18a.bin) ht...

RCGroups thread: Jumper R8 Receiver - 8-channel PPM/16 channel SBUS, D16 compatible, telemetry Midelic Firmware thread: Jumper R8 Receiver -...

 Some good tips from the Amazon page. BIT/DESOL3 is the replacement tip. Look at the other answers, they say it has a 2.1mm opening. This is...

AKA AngleWings RareBear Rarebear Funfighter - EPO 620mm (PNF) Wing Span: 620mm Length: 535mm Flying weight: 345g Prop: 5.5x4.5 (3pc Included...

Nice overview here:  https://www.youtube.com/watch?v=Sww1mek5rHU

As they come a 600 lipo gets the COG just fine, its not that fussy but  take the weight off the rear end .. its responsive enough even when ...

No PPM Encoder? Make your own with Arduino pro mini BuzzsArduinoCode/PPM_Encoder.h at master · davidbuzz/BuzzsArduinoCode PPMEncoder - Ard...

RC Groups - View Single Post - FRSKY Taranis "How to" Thread Capturing a double-pull of a momentary switch Thought I...

Courtesy of Mike Blandford, of course! FrSky D16 firmware for D8 receivers - RC Groups RC Groups - View Single Post - FrSky D16 firmware ...

In {Print, Filament, Printer} Settings, for each systems setting you want to keep: save a copy with your own name, e.g. "marhar PLA...

Mike Blandford confirms: In auto-level mode, the individual gains set using the script affect the amount of servo movement output to get t...

Old, so here's some links before they disappear. Logic Shrimp logic analyzer - DP Logic Shrimp v1 logic analyzer - Seeed Studio Ind...

Basics of Oscilloscopes  - How to use an Oscilloscope | RIGOL EDU Basic Lab Guide.pdf

tl;dr: Wyze supports RTSP with a bit of effort. Directions and download here: https://support.wyzecam.com/hc/en-us/articles/360026245231-...

https://stm32-base.org/boards/STM32F103C8T6-Blue-Pill Warning:   This board may have a wrong value of resistor on the USB D+ pin. Ins...

https://www.banggood.com/Geekcreit-375pcs-3MM-5MM-LED-Light-Emitting-Diode-Beads-Resistance-Lights-Kits-Bulb-Lamp-p-1027601.html Current ...

On Banggood . Demo: https://github.com/Xinyuan-LilyGO/TTGO-T-Display Random notes for the BG page: IPS ST7789V 1.14 Inch has 135...

Setup Be sure you have run the self-test to set level and stick travel. Depending on servo installation, pitch may be reversed.  That'...

I do this so I can more easily inspect the printhead for ooze, etc. Install OctoPrint plugin "GCODE System Commands" https://...

#!/bin/sh # release the pin on exit trap 'echo 0 >/sys/class/gpio/gpio23/value;echo 23 >/sys/class/gpio/unexport' 0 ech...

tl;dr: 99% chance it's a USB cable problem. If you're a manufacturer, blah blah major and minor device numbers Looking for th...

 Really BG is basic. They've got a product on the site, you place an order, you'll eventually get it when they have some, end of st...

Attach to an Arduino:  two gimbals (4 pots) two switches external Tx module Write control loop read values from pots and switches...

LiPo Voltage metering with Arduino DIY lipo voltage checker (arduino) - YouTube 1S-6S Battery Voltage Monitor (ROS) : 7 Steps (with Pictu...