EastBay RC

tl;dr: For Horizon UMX planes and an OpenTX transmitter, set output channel to 80%. From RCGroups: All Horizon Hobby Ultra Micro (UMX) m...

(update) One-page checklist is here . If you've been through the setup before, it's a nice summarized quick reference. Here's ...

Extracts from RCG: Mine is 61g AUW , 13" dia. Dollar tree foam with paper off. using UMX HW and 1S brushed motor and prop ( don...

The ESC is programmed from the factory to have prop brake OFF. TO PROGRAM THE ESC FOR PROP BRAKE: Turn radio and plane off. Turn radio on an...

Operation: current used in AH.  Press to start Mode 1 testing. battery voltage. No testing, current voltage.  Mode 1: open circuit vol...

Disclaimer: I am not a lawyer, etc.  Here's my layman's interpretation of sections 343 and 344 of this document: https://www.congres...

A coworker explains it to me: TL;DR; is that instead of just having full forward/reverse current or not on each winding, the driver can al...

Chris Anderson started DIY Robocars, and Adam Conway and William Roscoe's response is the Donkey Car.  And EastBay RC is building two ...

In the Nutball thread... Wasp Rainbow 800mm DV8 Superslo28 EPPYak55 Boomer Jr. and Sr. Wisel

 A celebration of Bush Piloting in Berkeley today!

Copied from RCGroups : Initial balancing & trimming: 1) MEASURE the CG on your plane. Do whatever is necessary to adjust it to 31mm,...

GoldGuy, the inventor of the NutBall, reveals some NutBall tricks and his propensity for poetry: 1.  Next time your out, experience the di...

Here's what you need to get started in Remote Control Aeromodelling!  This is everything you need except for actual aircraft. Transmi...

From BangGood .

Eflight 280mAh 2S 30C Nanotech 300mAh 2S 35-70C Hyperion G7 300 mAh 2S 50C (different connector) 6X Parallel JST-PH Charge Lead